What is a good reaction time?
A good average reaction time on a simple visual task is one that falls inside or faster than the 200 to 250 millisecond reference range when you repeat the test on the same device. Scores move with sleep, practice and hardware, so one lucky round is a weak basis for a judgement.
The full spread across ordinary adults is wider than that range, especially in a browser. Well over 300 milliseconds is not unusual on a touchscreen. Compare yourself with your own earlier averages before treating a single run as a label.
Source: Santiago et al., 2025 (citing Donders, 1868); Woods et al., 2015; last updated: 23 November 2026.
Where does the 200 to 250 millisecond figure come from?
Published adult simple visual reaction time is commonly given as 200 to 250 milliseconds for one signal and one response (Donders, 1868, as summarized by Santiago, Meseguer and Valenzuela, 2025); a calibrated button-press study of 1,469 adults aged 18 to 65 gives a mean of 231 milliseconds, or 213 milliseconds after subtracting 17.8 milliseconds of measured hardware delay (Woods, Wyma, Yund, Herron and Reed, 2015).
The 200 to 250 millisecond range comes from laboratory work on simple visual reaction time: one stimulus, usually a light, and one response, usually a button press. Participants watch for the light and press as soon as they see it. The measured interval is the whole chain — the eye, the visual pathway, the decision, and the movement of the hand.
That setup is deliberately simple, which is why it is the standard reference. The moment you add a choice — which of four lights, or the square versus the circle — the number climbs because decision time is added. So when someone reports 180 milliseconds, the first useful question is: at what task, and on what equipment?
If your homepage average sits between 200 and 250 milliseconds, you are inside that published reference range. A result around 300 milliseconds on a phone, in a busy browser, or late at night is still a common browser reading. This site does not collect scores, so none of the figures on this page are "our users."
This page's comparison is for a visual, single-click task. The homepage tester does not subtract display lag. The figures on this page are not a health or driving assessment.
Source: Woods et al., 2015; Santiago et al., 2025 (citing Donders, 1868); last updated: 23 November 2026.
How does simple reaction time differ from choice reaction time?
Simple visual reaction time is the fastest and most widely reported of the common laboratory tasks, and it is the one this site measures: one colour change, one tap. Choice reaction time is slower because you must pick the right response. Auditory simple reaction time tends to be faster than visual, and reacting to a moving target is slower and more variable.
| Task | What you are doing | Typical pattern |
|---|---|---|
| Simple visual | One signal, one response | The standard reference; commonly cited at 200–250 ms for adults |
| Choice reaction | Several possible signals, you pick the right response | Noticeably slower than simple, because decision time is added |
| Auditory | A sound instead of a light | Tends to be faster than visual |
| Moving target | Tracking or reacting to something in motion | Slower again, and much more variable |
Source: task pattern from laboratory simple-reaction work summarized in Santiago et al., 2025 (citing Donders, 1868) and the adult visual mean in Woods et al., 2015; last updated: 23 November 2026.
Does reaction time get worse with age?
Published work finds a gradual slowing with age, with the exact size of the change depending on the task and the sample. Woods et al., 2015 reported about 0.55 milliseconds of slowing per year between ages 18 and 65. Der and Deary, 2006, using a large UK sample, found that simple reaction time showed little slowing until around age 50, while choice reaction time slowed earlier.
Treat age as context for a number, not as a rule about what you should score, and never as a claim that your time equals a particular age. A rested 45-year-old on a wired mouse can beat a tired 25-year-old on a phone. For decade-by-decade findings, see typical ranges by age.
Source: Woods et al., 2015; Der and Deary, 2006; last updated: 23 November 2026.
Why do published averages disagree?
Published averages disagree because the word "reaction time" is used for different tasks, equipment and samples. A lab button and a touchscreen are not the same measurement, and a study of athletes is not a study of the general population. Instructions matter too: "react as fast as you can" and "react accurately" produce different results.
Computer hardware adds its own delay, and this site's tester does not subtract it. Woods et al., 2015 measured 17.8 milliseconds of monitor and mouse delay in a calibrated lab, noted that standard mouse drivers may add 20 milliseconds or more, and cited evidence that hardware and software can inflate measured simple reaction time by up to 100 milliseconds (Neath et al., 2011). Some televisions add much more: Sound & Vision, 2013 measured 131.1 milliseconds on a Samsung F8500 and 119.83 milliseconds on a Sony KDL-55HX850 in standard modes.
Source: Woods et al., 2015; Morrison, Sound & Vision, 2013; last updated: 23 November 2026.
How should I compare my result fairly?
Stay on one device, use the five-round average rather than a single tap, and repeat the test on three separate days if you want a trend. Note the time of day and how you slept; time of day and sleep alone can move an average by tens of milliseconds. Ignore the best round if you want a number that will reproduce.
When you have that number, the useful next step is how to improve reaction time. If you have not measured yet, open the homepage tester first so you have something to compare against.
This test only reflects performance on a single-click visual task and is not a health or driving assessment.